Filter
Top Products
C/eaning
Your Iced
Tea
Pot Before First Use
1.
2.
3.
4.
5.
6.
Please clean your unit prior to first use (or when unit has not been used
for
some time).
First unplug unit from
electrical
outlet. Wash the pitcher and lid with warm
water and mild detergent. Rinse thoroughly. Wipe exterior and brewer with
a
soft, damp cloth, then
dry with a soft
towel.
DO
NOT use abrasive
cbarr
ers or metal scouring pads.
Do
NOT IMMERSE OR
RINSE
UNDERSIDE
OF BREWER IN WATER.
NO PARTS ARE DISHWASHER SAFE.
Fill pitcher with water to the water level line marked on the pitcher
and
pour into the brewer
-
approximately 32 ounces. The water will not leak
from the brewer.
Place the brewer, with
lid,
onto the pitcher. Make sure the brewer and
pitcher fit together snugly.
CAUTION: Do not operate the machine unless the
pitcher
and brewer
with
Iid
fit snugly together; otherwise, hot water-and steam could
escape.
DO
NOT
OPERATE
WlTHOUT
LID TO AVOID RISK OF
SCALDING
AND
BURNS
FROM
HOT WATER AND
STEAM.
Plug the cord into an electrical outlet and push the ON button to turn the
machine on. The indicator light will illuminate to tell you that the machine
is on.
PLEASE NOTE: The first time
the
machine
is used, it may not be
necessary to depress the ON button to
turn
fhe machine on; simply plug-
ging the machine into an outlet may
start
the brew cycle.
Also,
If
the
ON button is depressed before the machine is plugged into an outlet,
plugging the machine into an outlet
will
start the brewing process.
Note: if you wish to turn
the
machine
OFF during
the
brew
cycle, grasp
the
molded
plug and unplug
the
power cord
When the water has cycled through, the machine will shut off automati-
cally. The indicator light will turn off to let you know the cycle is over.
Grasp the molded plug and unplug
the
power cord.
CAUTION: Some
residual steam may escape from the brewer when the cycle is
over.
CAUTION: The
liquid
in
this
brewer Is very hot and can
cause
burns.
Handle with
caution.
CAUTION: Use care when
Iifting
the brewer from the pitcher.
A seal may have formed during the brewing process.
Lift
and
remove the brewer from the pitcher using the brewer handle, and
discard the water in the pitcher. (as referred to on page 9
&I).