PAGE 10 — MVH-406DSY PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #1 (08/13/07)
MVH-406DSY — OPERATION AND SAFETY DECALS
Figure 2. Operation and Safety Decals
Figure 2 displays the operation and safety decals as they appear on the reversible plate compactor. Should any of these decals
become damaged or unreadable, contact the Multiquip Parts Department for a replacement set.
P/N 920211640
Shell Tellus Oil
32
Shell Tellus Oil
32
P/N 920211090
P/N 920204580
P/N 920201580
MVH-406
OPERATIONAL CAUTION
Do not move travel lever
if engine stops
NPA-1106
D
C
L
3
3
3
P/N 920203330
J
P/N 920106760
STOP
RUN
START
V BELT HDPF-5370
P/N 920211010
NPA-537
J
SAE 10W-30
MOTOR OIL
P/N 920201950
NPA-195
J
P/N: 920209620
0PERATIONAL CAUTION
Prior to OPERATION, check the engine oil and fuel levels. If not enough, add to proper levels.
Warm up engine at low speed for 3-5 minutes.
Operate machine at full throttle speed. (incorrect clutch engagement causes clutch to burn.)
Use travel lever for forward & reverse motion. Do not push or pull travel lever strongly.
NPA-962
J
P/N 920105070
Serial No.
Model No.
CONTACT
MQ PARTS DEPT.
P/N 920211060