Nespresso ES 80 Coffeemaker User Manual


 
251104
TSM SUCCESS MANUAL
®
Safe to use - easy to understand due to
TSM
®
- Total Security Management and ergonomic communication
®
Household and commercial use only. Any servicing other than cleaning and user
maintenance should be performed by an authorized service representative.
Do not immerse base in water or try to disassemble.
To reduce the risk of fire or electric shock, do not remove the base, or any user serviceable parts inside.
Repair should be done by authorized service personnel only.
Check voltage to be sure that the voltage indicated on the name plate corresponds with your voltage.
Never use warm or hot water to fill the water container. Use cold water only!
Keep your hands and the cord away from hot parts of the appliance during operation.
Never clean with scouring powders or sharp implements.
The cord or any defective element must be replaced exclusively by your Nespresso dealer.
Under no circumstances should you open the machine yourself.
Read these instructions carefully before using your Nespresso machine.
Do not plug the machine into anything other than a grounded electrical socket. Verify that the voltage indicated
on the technical specifications plate on the bottom of the unit corresponds to your electrical installation.
Do not place your Nespresso machine on a hot surface (electrical heating plate for example) or near a flame.
Attention: Do not draw off hot water while temperatur indicator lamp (red) blinks fast. Strong steam jet
would result instead of hot water - hazard of burning! Cool down the system see Cappuccino «4».
Do not open the jaw while the machine is functioning since the extraction of coffee is done under high pressure.
Do not use the machine without the drip tray and grill in place.
Remove the plug when cleaning your machine.
Ensure that the electrical cord does not come into contact with sharp or hot objects. Do not disconnect the
electrical plug by pulling on the cord.
Avoid touching the electrical cord as well as any other part which may become hot during the use of the
machine (steam nozzle, chrome portion of capsule holder).
Never plunge the machine in water.
Keep the machine and the electrical cord out of children‘s reach.
For descaling, adhere to the directions which follow:
2 Preparation: please read carefully the safety instructions on the descaling packaging.
3 Descaling: do not open the jaw and do not use the steam nozzle during descaling process.
4 Rinse: rinse the water tank and clean the machine to avoid any residual descaling agent.
Do not use the machine if it is damaged or if the cord is in bad condition.
The cord or any other defective element must be replaced exclusively by an authorized after-sales service center.
Under no circumstances should you open the machine yourself.
CAUTION
SAFETY INSTRUCTIONS
Save these Instructions
2