Pin assignment of internal ports
A26361-D1761-Z120-1-6319 English - 11
Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.
i
Some of the following connectors may be optional!
Front panel
Watch the poling of the LEDs. The positive pole
of the connection cables is often indicated with a
coloured wire.
1
2
HD-LED
1)
Power On/Off
Reset
1)
Power On
LED
1) 2)
Recovery Password
Speaker
Connection Note
Reset
Power On/Off
HD LED
Power On LED Indicates the system state APM or ACPI (see annex, "APM and ACPI system
status, energy-saving modes" section).
Password see "Settings with switches and jumpers" chapter
Recovery see "Settings with switches and jumpers" chapter
Speaker 0,5 W at 8 Ohm
CD audio input
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input