Niles Audio MSU440Z Crepe Maker User Manual


  Open as PDF
of 2
 
SPECIFICATIONS SHEET
©2007 Niles Audio Corporation. All Rights Reserved. MicroFlasher, MicroSensor, Niles, the Niles logo and Blending High Fidelity and Architecture are registered
trademarks of Niles Audio Corporation. CS0157
NILES AUDIO CORPORATION 12331 SW 130 Street, Miami, FL 33186 1-800-BUY-HIFI- 305-238-4373 – www.nilesaudio.com
IR Repeater System for
MultiZone Applications
MSU440Z
Stock Number
FG01005
S
PECIFICATIONS
1
2
3
The MSU440Z is one of three elements needed to form a complete remote control extender system.
Elements of a remote control extender system:
Infrared Sensor/Keypad receives/initiates the commands and routes them to the Infrared Main System Unit.
Infrared Main System Unit amplifies and distributes the commands to the Infrared Flashers.
Infrared Flashers transmit the commands to the A/V components
A
CCESSORIES
Features
■ Create up to a four-zone A/V system using multiple AM/FM receivers
■ Use with IRH610 (FG01018 to provide additional inputs)
■ Four-zoned sensor inputs with removable screwless connectors
■ Eight flasher outputs with 3.5mm flasher output jacks: four dedicated flasher
outputs (one per zone), four assignable flasher outputs and one switchable
high/low flasher jack for driving an IRB1 flooding flasher or a MicroFlasher
®
■ Cascade input and cascade output 3.5mm jacks for system expansion
■ Low profile, small footprint for unobtrusive installation
■ Four 3.5mm 12 Volt DC output jacks triggered by the presence of status or
discrete IR commands
■ One master 3.5mm 12 Volt DC output jack triggered by the presence
of status from any zone or IR Command
■ Integrated mounting wings accommodate both vertical and horizontal
installation
■ Integrated contact closures triggered by the presence of status or discrete
IR commands
■ UL-listed regulated in-line power supply with universal voltage capability
■ 12 Volt DC status input jack
■ System feedback LED indicator provides visual indication of operation
■ Included room labels allow for clear input identification
Specifications
■ Dimensions: 8" wide x 1-1/4" high x 5-1/4" deep
20.32 cm wide x 3.18 cm high x 3.34 cm deep
Warranty: Two-year limited
Shipping weight: 1 lb.
 previous