Filter
Top Products
ENGLISH
6
Assembly of Base Support
Push Handle (E) attaches onto the Storage 1.
Compartment (C) using supplied #1 Screws.
Insert Cross Bar (K) into the square inserts on the inside of Base Support (I) 2.
and secure from below with #2 Bolts. Insert the Leg Assembly (L) over the
protruding ends of the Base Support (I) and fasten #4 Studs and #6 Nut Cap.
Secure Bottom Plate (J) of the Storage Compartment (C) to Base 3.
Support (I) using four #2 Bolts. Open Storage Compartment (C)
door to help support Bottom Plate (J) with your hand.
Assemble Base Support (I) into the bottom of the Storage 4.
Compartment (C) and secure with #3 Bolts.