Filter
Top Products
MODELS NS130BL • NS130SS • NS130WW
NS136BL • NS136SS • NS136WW
Page 5
CONNECT THE WIRING
COMPLETE INSTALLATION
HO0059
15 Reinstall Bottom Cover using 5 screws.
16 Install Halogen Bulbs. Use 120 V, 50 W, shielded halo-
gen bulbs - MR16 or PAR16 with GU10 base. Purchase
bulbs separately.
HO0060
HE0059
14 Connect House Power Cable to range hood wiring
- BLACK to BLACK, WHITE to WHITE, and GREEN or
BARE WIRE to GREEN Ground Screw.
HOUSE
POWER
CABLE
GREEN
GROUND
SCREW
(1) PUSH IN
(2) ROTATE
CLOCKWISE
INSTALL THE HOOD
HD0154
11 Run House Power Cable between service panel and
hood location. Attach power cable to hood using appropri-
ate connector.
12 Hold the hood in position under the cabinet.
For ducted installations: Make sure the damper / duct
connector enters the ductwork and that the damper opens
and closes freely.
13 Tighten all 5 mounting screws completely to secure the
hood to the cabinet.
HOUSE
POWER CABLE
WARNING
To reduce the risk of electrical shock, switch power off
at service panel. Lock or tag service panel to prevent
power from being switched on accidentally.