Filter
Top Products
Duct-free
This easy-to-install solution is ideal where
ventilation is needed but ducting is not
possible. Use in half baths or rooms where
humidity isn’t a concern.
Model 682NT
• Patented, fast snap-in metal
housing installation
• Fan circulates air past replaceable
activated charcoal filter model 97009563
• Fits 2"x4" ceiling or wall construction
14
Model 8814R
Model 671R & 672R
Model CFM Sones Notes
8832WH 80 2.5 Not UL tub & shower
8832SA 80 2.5 Not UL tub & shower
8814R 110 4.0
80 to 110 CFM•
Centrifugal blower wheel and 4-pole •
motor deliver high exhaust capacity at
low sound levels
Mounting flanges with keyhole slots for •
fast installation
• White polymeric grille with torsion
spring mounting
Model CFM Sones Notes
671R 90 3.0 Wall/Ceiling mount
672R 110 4.0 Wall/Ceiling mount
695 70 6.0 Wall/Ceiling mount
696N 50 4.0 Wall/Ceiling mount
Model 695 & 696N
50 to 110 CFM centrifugal blower wheel •
Double-strength steel mounting flanges with •
keyhole slots for fast installation
Metal grille kits for 695 & 696N S97011308•
UL Listed for use over tub or shower when •
installed in a GFCI protected branch circuit
*All models available in Project Packs
Model 8832SA
690NT Bath Fan Upgrade Kit
Cut sound levels up to 50%•
Boost air movement up to 20%•
10 minute installation•
60 CFM, 3.0 Sones•
Modern white grille•
No special tools needed•
The NuTone bath fan upgrade kit lets
you convert your old bath fan to a brand
new unit in just 10 minutes. Improve
performance, reduce the sound level, and
upgrade the appearance of your economy
fan in minutes.
NuTone 690NT Upgrade Kit
replaces the models below:
Wrench
Two motor plates,
depending on your fan model.
Quieter plug-in
fan motor
New grille
If your
grille looks
like this:
The fan is very
likely one of
these models:
Housing
dimensions:
NuTone
693, 695,
696N
7½" x 7¼"
or
8" x 7¼"
Broan 670, 671,
688, 689
7½" x 7¼"
Not compatible
with 8"x8
1
⁄4"
Nautilus
N671, N688
NuTone Ventilation Fans
—
Fan Upgrade Kit/Bath Fans/Duct-free
Model 8832WH
• White polymeric grille with torsion
spring mounting
• Fits 2"x4" construction
• Silver anodized aluminum grille
• Fits 2"x4" construction