Filter
Top Products
troubleshooting
24
PROBLEM
THINGS TO CHECK SOLUTION
Sealing circles are overlapping.
Sealing on the same sealing
circle.
Sealing circle is lined up with
the silicone ring.
Existing seals form a full circle
with even thickness. See page 9.
The Liquid Catch Tray is clogged.
Press Pads are obstructed.
Bag is not flat and smooth over
the sealing area.
Zipper is not securely closed.
Parts are missing or incorrectly
installed.
Press Pads are deformed.
Re-seal the overlapped circle. Then find a new
sealing circle to use. See page 10.
Find a new sealing circle to use. See page 10.
Re-seal the overlapped circle. Then find a new
sealing circle to use. See page 10.
If you have perfomed steps on page 10 and you
continue to have air leaks, throw away bag.
Remove the tray and clean it. See page 21.
Clear out any food that is in the sealing area and
reposition the bag. See page 7.
Re-position the bag so that there are no creases
or folds in the sealing area. See page 6.
Close the zipper securely. Run your fingers through
the zipper-top. See page 4.
Assemble the parts as illustrated on page 21.
Remove the press pads and let it sit out for several
hours to return to original shape. See page 21-22.
Frisper is not working.
Sound is present.