Filter
Top Products
–13–
cable and dispose of the product according to local waste
disposal laws.
- This product is free of CFC’s (cooling circuit contains
R-600a). Check the compressor label on the rear of the
appliance or the rating label inside the fridge to see which
refrigerant is used for your re f r i g e r a t o r.
HOW TO USE THE REFRIGERATOR COMPARTMENT
1. Connect the lead to the mains. ( At least wait 2 hours after
delivery: refer to section ”Before connecting to the mains)
Food can be stored after 3 to 4 hours cooling.
- the interior light switches on when the door is opened;
- the compressor operates and starts cooling;
The suitable storage temperature for fresh food is provided in
the "MID" position at an ambient temperature of 16 ~ 32ºC.
Model: NF1-350.../NF1-370...
1. See the CONTROL PANEL. There are six buttons,
"POWER", "SUPER", "DISP. TEMP.","REF. TEMP.",
"ECO" and "LOCK".
NOTE: If you connect the lead to the mains, you can see the lights
of the control panel display are "On" . Initially both compartments
temperatures are set to "3" position automatically.
GENERAL RECOMMENDATIONS
Keep air vents open.
No glass bottles in the freezer
compartments. The bottles might
burst.
Ice cubes and ice lollies straight out
of the freezer are too cold for
consuming.
They may cause ‘cold’ burns.
Do not allow children to play or hide
in the refrigerator to prevent the risk
of trapping and suffocation.
Always unplug before cleaning and
servicing.
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
English
LOCK
SUPER
DISP.
TEMP.
REF.
TEMP.
ECO
POWER
Main on & off switch – for switching complete
appliance on or off.
Instant cooling with powerful supply of cold air.
This button is for the fast freeze function. While
this function is selected, the refrigerating device
remains switched on continuously and produces a
very low temperature inside the freezer. If SUPER
mode is cancelled by pressed this button, the new
mode will be returned on last condition.
To di sp la y the t emp eratu r e of r e f r i g e r a t o r
compartment and freezer compartment. When
this button is pressed one time, the current set
temperature of refrigerator compartment will be
shown in display for 5sec. When this button is
pressed two times, the temperature of freezer
compartment on each step will be shown in
display for 5sec.
To indicate the current set temperature when this
button is pressed one time. User can set new
t e m p e r a t u re when th is b u tt on i s pr e s s e d
re p eated ly until the re q u i re d temp e r atur e is
shown.
Energy saving, e.g. when you are away from home
for a long period. ECO indicator remains on
while the ECO function is operating. If ECO
mode is cancelled by pressed this button, the new
mode will be returned on last condition.
To lock & unlock all keys on CONTRO L
PANEL. If lock icon is on, any other key doesn’t
work until ‘LOCK’ button is pressed to cancel
‘locked’ condition.
2. If you want to change the compartment temperature, press
"REF. TEMP." button. When you press this button, the
lights illuminate in sequence. It is composed of 6 steps. It
follows 3 _ 2 _ 1 _ 6 _ 5 _ 4 _ 3 _ 2 _1 _ 6 _5
3. The storage temperature suitable for fresh food is provided at
"3" position at an ambient temperature of 16ºC to 32ºC.
NOTE: After power failure or momentary power failure happens,
when power is back on, the unit returns previously “set temperature˝.