Filter
Top Products
4
usIng Your Blender
Clean blender according to the instructions in the “Cleaning and Storing
Your Blender” section.
Jar assembly:
1. Turn jar upside down so the small opening is at the top. (Figure 1)
2. Place sealing ring over jar opening. (Figure 1)
3. Place blade into jar. (Figure 2)
Figure 1 Figure 2
Figure 3
F
igure
4
4. Place threaded jar nut over blade and jar. Place the threaded jar nut on
jar and turn it clockwise to tighten. (Figure 3)
5. Place jar assembly onto base. (Figure 4)
6. Place ingredients into jar according to your recipe. For best results always
add liquids first when blending.
7. Place pour through lid on jar.
8. Plug the power cord into a 120 Volt AC electrical outlet.
9. Touch the “POWER” button to turn the product on. The LED Indicator
will flash red (and continue to flash) indicating it is ready to operate. You
are now ready to blend. Avoid contact with blades and moveable parts.