Oster 153034-000-000 Blender User Manual


  Open as PDF
of 14
 
4
5
us I n g Yo u r Bl e n d e r
Clean blender according to the instructions in the “Cleaning and Storing
Your Blender” section.
Jar assembly:
1. Turn jar upside down so the small opening is at the top. (Figure 1)
2. Place sealing ring over jar opening. (Figure 2)
3. Place blade into jar. (Figure 3)
Figure 1 Figure 2 Figure 3
Figure 4
Figure 5
4. Place threaded jar nut over blade and jar. Place the threaded jar nut on jar
and turn it clockwise to tighten. (Figure 4)
5. Place jar assembly onto base. (Figure 5). Line up tabs of jar with tabs on
blender base. Make sure the tab of the jar on the left side is in the back of
the tab on the blender base and the tab of the jar on the right side is in
front of the tab of the blender base. Make sure jar is sealed into position.
6. Place ingredients into jar according to your recipe. For best results always
add liquids first when blending.
7. Place lid with filler cap on jar.
8. Plug the power cord into a 120 Volt AC electrical outlet.
9. Touch the “POWER” button to turn the product on. The LED Indicator
will flash red (and continue to flash) indicating it is ready to operate. You
are now ready to blend. Avoid contact with blades and moveable parts.
sP e e d se l e C t I o n :
•
Touch the “POWER” button to turn the product on.
• Scrollupordowntoselectdesiredspeedandpressthe“START/STOP”
button to blend ingredients to desired consistency.
• ToStopblending,pressthe“START/STOP” or “POWER” button. The
motor will come to a stop. (Pressing the “POWER” button stops the
motor and turns off the blender.)
• Youcanmovebetweenspeedsatanytimewhileblendingbypressing
Scroll up or down to select desired speed and press the “START/STOP”
button to blend ingredients to desired consistency. The new speed will
start without interruption.
• Pressingthe“PULSE”Buttonwillgiveamomentarypulseatthespeed
indicated by the green light. Pulsing feature is availabe at any of the speed
options. The motor will then stop.
Pr e -Pr o g r a m m e d se t t I n g (se l e C t mo d e l s on l Y )
Your new blender features a Pre-Programmed “Frozen Drinks” Setting.
• The“FROZENDRINKS”settingisdesignedforperfectlyblended
frozendrinks.The“FROZENDRINKS”settingrunsonhighspeed
for 30 seconds and will automatically shut off at the end of the cycle.
• Tostopblendingwhileinthissetting,pressthe“START/STOP” or
“POWER” button. The motor will come to a stop. (pressing the
“POWER” button stops the motor and turns the blender off.)
12345678910 11 12
BEAT PURÉE CHOP WHIPMIX GRATE BLEND SHRED GRIND LIQUEFY
ICE CRUSH
LOW HIGH
12-Speed
LOW HIGH
12345678910
STIR
STIR
PURÉE CHOP WHIPMIX GRATE BLEND GRIND LIQUEFY
ICE CRUSH
10-Speed
 previous next