Filter
Top Products
17
Boiling
water
Dispense
How to Use
When the unit is not in use
Starts boiling
automatically.
Notifies when boiled.
Fall in temperature
( )
Automatically switches
to 190 keep-warm
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the mark.
Lid release part
Operation panel
Cautions
●
Do not pour out water too quickly.
If water is splashed over lid release section or
operation panel, it may cause a malfunction.
●
Do not leave water standing in the container.
It may cause the container to corrode or smell.
Connect the power plug after filling with water and close the lid. (1
→
2)
beep beep
beep beep
Light on
Charging battery indicator (for cordless
dispensing)
Light off
Light on
Water temperature indicator
When changing the setting of keep warm temperature (
☞
P. 19)
When adjusting the temperature suitable for tea (
☞
P. 19)
Press
Press to
Pour
Dispensing speed of hot water varies depending on
degree of pressing and dispensing time.
Light on
Automatically locked in 10 seconds after
dispensing is fi
nished.
Charging battery indicator. (for cord-
less dispensing)
Guideline for dispensing volume
Battery charge
volume
Dispensing volume
Approx. 3L or more (4.0L type)
Almost full volume (3.0L types) w 1
1.5L or less
Dispensing period (Amount of time to press continuously)
Less than 5 seconds
From 5 to 12 seconds
More than 12 seconds
Press slightly
Press strongly
* Be careful of hot water splashing if pressed too strongly
With cordless dispensing, and before the water
boils, there are only two speeds
*
1
Full water volume may not be indicated if dispensed
frequently .
●
Indication lights off and cannot dispense hot water
after 8-10 hours even if not dispensed.
Water temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L
type) at room temperature
68°F(20°C)
*
Temperature falls quicker if water volume is less.
Press
NC-HU401_301-EN-6.indd 17 11/12/08 2:35:45 PM