5
15.
Do not allow small metal parts near the body plug.
16. Only use the power cord designed specifically for the
unit. Do not use a different cord and do not use this
cord with any other device.
17. Do not let the unit fall over.
Do not lift, tilt, or shake the unit or carry it by the lid.
• Even when the dispense key is locked, hot water may
leak through the dispensing spout and the steam vent,
causing burns, if the unit falls over or is tilted.
18.
Close the lid securely, and not by force.
19. Do not throw away remaining hot water while the lid
is attached.
20.
When opening the lid, keep hands away from the
steam.
21. Do not open the lid or dispense hot water while
boiling.
22.
Do not fill above maximum water level.
23. Do not block the steam vent.
24.
Do not rotate the unit while dispensing hot water.
25.
Do not use appliance for other than intended use.
• Do not use to store ice. Condensation will occur,
creating a potential source of electric shock and
malfunction.
•
Do not heat tea bags, tea leaves, milk, alcohol or
anything other than water. Such items may spurt out
and cause burns. The water tube may also get clogged,
the inner container may burn or corrode, and the
fluororesin insulating coating may peel off.
Lid opening lever
Steam vent
Lid
Maximum
water level
Dispensing
spout
Cord
Body plug
Power cord
*The shape of plug differs according to region.
SAVE THESE INSTRUCTIONS
Notes:
A. A short cord is provided to reduce the risk of entanglement or tripping over a longer cord.
B. Extension cords are available and may be used if care is exercised in their use.
C. If extension cord is used,
1) the marked electrical rating of the extension cord should be at least as great as the electrical
rating of the appliance, and
2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can
be pulled on by children or tripped over unintentionally.
D.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
IMPORTANT SAFEGUARDS
Power plug*
NC-HU401_301-EN-6.indd 5 11/12/08 2:35:23 PM