Filter
Top Products
- 13 -
How to Operate
For selecting length of tone “short beeps for 60 seconds”:
Example: To select short beeps for 60 seconds
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
Follow step 1-4 on page 12. DO NOT CLOSE THE DOOR!
PROG
1
5
0
Within three seconds after pressing Prog pad at step 4, press
Number/Memory pad “0” once.
“PROG” will start to blink and 2nd Stage Heating Indicator “2” (the
length of beep tone “short beeps for 60 seconds”) will be indicated.
PROG
2
6
PROG
Press Prog pad.
“PROG” will stop blinking. This means that you have completed
programming.
Three seconds later, “0” will appear.
PROG
2
• Closethedoor.DigitalDisplayWindowwillgoblank.
G. PROGRAM LIST
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and leave it open.
The oven lamp will turn on and “0” will appear.
2
STOP/
RESET
START
While pressing Stop/Reset pad, press Start pad.
All currently programmed information (the program set into each
Number/Memory pad (A/B sides), Beep Tone, and Program Lock
information) will continuously appear.
e.g.
PROG
PROG
2
PROG
1
HI
PROG
1
MED
MED
H. CYCLE COUNTER
To Check The Number Of Cycles That The Oven Has Been Used In X
Manual Mode:
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and leave it open.
The oven lamp will turn on and “0” will appear.
2
STOP/
RESET
POWER/
LEVEL
While pressing Stop/Reset pad, press Power Level Selector pad.
The number of cycles that the oven has been used in manual mode will
appear.
e.g.