Panasonic NE-17723 Microwave Oven User Manual


  Open as PDF
of 40
 
- 13 -
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
3
Press Shift (A/B/C) pad, Number/Memory pads “1” and “5”.
The selected pad number will appear and currently programmed
information will be indicated.
4
Press Power Level Selector pad.
Each time the pad is pressed, the Power Level switches as in the
Power Level Selector pad illustration on page 10. The selected power
level will be indicated, 1st Stage Heating Indicator “1” will start to blink.
5
Press Number/Memory pads “1”, “0” and “0”.
The set heating time will appear.
Note: The maximum set time for “DEFROST” and “P0” is 30 minutes, and
15 minutes for all others.
6
Press Prog pad.
“PROG” and 1st Stage Heating Indicator “1” will stop blinking.
This means that you have completed programming.
s SECONDSLATERhvWILLAPPEAR
Note:
s 0ROGRAMTHEREMAINING.UMBER-EMORYPADSASDESIREDBYREPEATINGSTEPSABOVE
s 7HENh02/'vISBLINKINGIN$IGITAL$ISPLAY7INDOWTHEPROGRAMCANBECANCELLEDANDORONEPRESSON
Stop/Reset pad erases the programmed Number/Memory pad number.
C.
PROGRAMMING NUMBER/MEMORY PADS — 2 to 5 stage heating —
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 14-15)
Example: To program cooking at DEFROST power for 1 minute and at HIGH power for 2 minutes into
Number/Memory pads “1” and “5” at A side
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
Follow steps 1 to 5 above.
6
Press Power Level Selector pad once.
The power level for 2nd stage will be indicated, 2nd Stage Heating
Indicator “2” will start to blink.
7
Press Number/Memory pads “2”, “0” and “0”.
The set heating time will appear.
Note: The maximum set time for “DEFROST” and “P0” is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes for
continuous heating (1 to 5 stage heating) that excludes
“DEFROST” and “P0”.
8
Press Prog pad.
“PROG” and 2nd Stage Heating Indicator “2” will stop blinking. The total
time for both stages will appear. This means that you have completed
programming.
s SECONDSLATERhvWILLAPPEAR
Note:
s 0ROGRAMTHEREMAINING.UMBER-EMORYPADSASDESIREDBYREPEATINGSTEPSABOVE
s 7HENh02/'vISBLINKINGIN$IGITAL$ISPLAY7INDOWTHEPROGRAMCANBECANCELLEDANDORONEPRESSON
Stop/Reset pad erases the programmed Number/Memory pad number.
s 2EPEATTHEABOVEPROCEDURETOSET(EATINGFORTHETHIRDSTAGEANDLATERSTAGES
How to Operate
 previous next