Panasonic NE-2180 Microwave Oven User Manual


 
- 10 -
How to Operate
4
Press Power Level Selector pad four times.
The selected power level will be indicated, “PROG” and 1st Stage
Heating Indicator “1” will start to blink.
POWER
11
PROG
A
STAGE DEF
5
Set the desired heating time using Timer Dial.
The set heating time will appear.
Note:up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD
11
PROG
A
STAGE DEF
6
Press Program Entry Button again.
“PROG” and 1st Stage Heating Indicator “1” will stop blinking.
This means that you have completed programming.
PROG
11
PROG
A
STAGE DEF
Three seconds later, Digital Display Window will go blank.
Note:
Program the remaining Memory pads as desired by repeating steps 2-6 above.
When you want to select Memory Area B, press Memory Shift pad before selecting the desired Memory pad
(step 3).
SHIFT
AB
(
AM
)(
PM
)
3
Press Memory pad you wish to program.
The selected pad number will appear and currently programmed
information will be indicated.
5
11
PROG
A
STAGE HI
C. PROGRAMMING MEMORY PADS
Single stage heating
INSTRUCTION
DIGITAL DISPLAY WINDOW
PAD
2
Press Program Entry Button.
“PROG” will start to blink.
PROG
PROG
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example:To program cooking on DEFROST power for 1 minute into Memory pad “5”
1
Keep the door closed.
Digital Display Window must be blank or show “0”.