Filter
Top Products
9
Control Panel
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
Note:
If an operation is set and start pad is not pressed, after 6 minutes, the oven will automati-
cally cancel the operation. The display will revert back to clock or colon mode.
Power Level
Popcorn Pad
(☛ page 13)
Power Level Pad
(☛ page 12)
More/Less Pad
(☛ page 13)
Timer Pad
(☛ page 20)
Quick Min Pad
(☛ page 12)
Stop/Reset Pad
Sensor Reheat Pad
(☛ page 16)
Display Window Step
by step instructions
scroll for easy operation.
Inverter Turbo
Defrost Pad
(☛ page 14)
Clock Pad
(☛ page 10)
Keep Warm Pad
(☛ page 12)
Start Pad
Sensor Cook Pad
(☛ page 16)
Pop-Out Dial to select
Time/Weight and
Sensor Menu
Before cooking: One tap clears
memory.
During cooking: One tap temporarily
stops the cooking process. Another
tap cancels all your instructions and
time of day or colon appears in the
Display Window.
One tap allows oven to begin
functioning. If door is opened
or Stop/Reset Pad is pressed
once during oven operation,
Start Pad must be pressed
again to restart oven.
* The control panel of
NN-SD667/SD767/T995/SD967
has the same key layout as
NN-SD696.
NN-SD696
IP0924_38M30AP_14_070404 2007.4.4 10:36 Page 11