Filter
Top Products
8
Oven Components Diagram
aa
External Air Vent
bb
Internal Air Vent
cc
Door Safety Lock System
dd
Exhaust Air Vent
ee
Control Panel
ff
Identification Plate
(Alternate location)
gg
Identification Plate (Alternate location)
hh
Glass Tray
ii
Roller Ring
jj
Heat/Vapor Barrier Film
(do not remove)
kk
Waveguide Cover (do not remove)
ll
Warning Label
mm
Menu Label
fljd h k ab
e
d m g
i
c
Oven Light:
Oven Light turns on only while cooking and will not turn on when oven door is opened.
(1) Display Window
(2) Power Level Pad (☛ page 11)
(3) Inverter Turbo Defrost Pad
(☛ page 13)
(4) Popcorn Pad (☛ page 12)
(5) Sensor Reheat Pad
(☛ page 15)
(6) Sensor Cook Pad (☛ page 15)
(7) Keep Warm Pad (☛ page 11)
(8) Timer Pad (☛ page 18)
(9) Clock Pad (☛ page 10)
(10) Quick Min Pad (☛ page 11)
(11) More/Less Pad (☛ page 12)
(12) Number Pads
(13) Start Pad
One tap allows oven to begin func
tioning. If door is opened or
Stop/Reset Pad is pressed once
during oven operation, Start Pad
must be pressed again to restart
oven.
(14) Stop/Reset Pad
Before cooking: One tap clears
memory.
During cooking: One tap
temporarily stops the cooking
process.
Another tap cancels all your
instructions and time of day or colon
appears in the Display Window.
Control Panel
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
IP0894_38M80AP_13_070404 2007.4.4 15:55 Page 10