34=@3&3?C3AB7<5'3@D713
(63A3B67<5A/@3<=@;/:
The oven causes Some radio and TV interference might occur when you cook
interference with with the microwave oven. This interference is similar to the
my TV. interference caused by small appliances such as mixers,
vacuums, blow dryers, etc. It does not indicate a problem with
your oven.
Steam accumulates During cooking, steam and warm air are given off from the
on the oven door and food. Most of the steam and warm air are removed from the
warm air comes from oven by the air which circulates in the oven cavity. However,
the oven vents. some steam will condense on cooler surfaces such as the
oven door. This is normal. After use, the oven should be
wiped dry (see page 9).
The oven is not plugged in Remove plug from outlet, wait
securely. 10 seconds and re-insert.
Circuit breaker or fuse is Reset circuit breaker or replace
tripped or blown. fuse.
There is a problem with the Plug another appliance into the
outlet. outlet to check if it is working.
The door is not closed Close the oven door securely.
completely.
'B/@B Button was not pressed Press 'B/@B Button.
after programming.
Another program is already Press 'B=>&3A3B Button to cancel
entered into the oven. the previous program and enter
new program.
The program is not correct. Program again according to the
Operating Instructions.
'B=>&3A3B Button has been Program oven again.
pressed accidentally.
The Glass Tray is not Take out Glass Tray and Roller
positioned properly on the Ring. Wipe with a damp cloth and
Roller Ring or there is food reset Roller Ring and Glass Tray
under the Roller Ring. properly.
The Roller Ring and oven Clean these parts according to
bottom are dirty. /@3/<2:3/<7<5=4G=C@
!71@=E/D3#D3< (see page 9).
The CHILD LOCK was Deactivate LOCK by pressing
activated. 'B=>&3A3B Button 3 times.
Oven will not turn on.
Oven will not start
cooking.
The Glass Tray
wobbles.
When the oven is
operating, there is
noise coming from
the glass tray.
The word “LOCK”
appears in the
7A>:/G+7<2=E.
$&# ! $#'' )' &!-
This displaying indicates a
problem with the microwave
generation system.
Please contact an authorised
Service Center (see page 28).
The oven stops cooking
by microwave and "H00",
"H97" or "H98" appears
in the display window.
IP4091_3BD60CP_15_120302:IP3854_38N04CP_01_111101 2012-3-2 Jerry 上上16:36 Page 27