Filter
Top Products
Control Panels
– 6 –
NN-ST677M
(13)
(6)
(1) Display Window
(2) Micro Power Pad (pg. 9)
(3) Time Pads
(4) Turbo Defrost Pad (pg. 10)
(5) Sensor Reheat Pad (pg. 14)
(6) Sensor Cook Pads (pg. 14)
(7) More/Less Pad (pg. 14)
(8) Auto Reheat Pad (pg. 12)
(9) Auto Cook Pads (pg. 13)
(10) Timer Pad (pg. 15)
(11) Clock Pad (pg. 8)
(12) Stop/Reset Pad
Before cooking: One tap clears your
instructions.
During cooking: One tap temporarily stops
the cooking process. Another tap cancels all
your instructions and time of day appears in
the Display Window.
(13) Start Pad
One tap allows oven to begin functioning. If
door is opened or Stop/Reset Pad is pressed
once during oven operation, Start Pad must
again be pressed to restart oven.
Beep Sound
When a pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard, the unit
did not or could not accept the instruction. The oven will beep twice between programmed stages. At the end of
any completed program, the oven will beep 5 times.
Note:
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will automatically cancel the
operation. The display will revert back to clock or colon mode.
*The control panel of NN-ST657S has the same key layout as NN-ST657W.
CONTROL PANELS
(1)
(2)
(5)
(3)
(4)
(10)
(7)
(12)
(11)
NN-ST667W NN-ST657W/ST657S
(13)
(8)
(11)
(10)
(9)
(1)
(2)
(3)
(4)
(12)
(13)
(6)
(1)
(2)
(5)
(3)
(4)
(10)
(7)
(12)
(11)