Filter
Top Products
22
Open the appliance door and the fur-
niture door at 90°. Insert the small
square (Hb) into guide (Ha). Put
together the appliance door and the
furniture door and mark the holes as
indicated in the figure.
Remove the squares and drill holes
with ø 2 mm at 8 mm from the out-
er edge of the door. Place the small
square on the guide again and fix it
with the screws supplied.
PR167/1
Hd
Hb
PR33
Hc
Ha
Fix cover (Hc) on guide (Ha) until it
clips into place.
2
1
m
m
ca. 50 mm
90°
ca. 50 mm
2
1
m
m
Place guide (Ha) on the inside part of
the furniture door, as shown in the
figure and mark the position of
external holes. Having drilled the
holes, fix the guide with the screws
supplied.