Filter
Top Products
Models BBRN/BBSN Installation & Operation Manual
Printed in USA 8 0213
Insert top pin
into bearing
Insert and tighten hinge pin
Figure 11. Installing Door
Shelving Adjustment
See Figure 12.
CAUTIO N
Completely empty shelf or
drawer before removing.
1. Open the door. Tilt the shelf and remove it
from the unit
2. Reposition each bracket separately. Grasp
the middle of the bracket, pull the front end
up and out, then forward to remove it.
3. Place brackets at desired location and reinstall
shelf(s).
Figure 12. Shelf Bracket
10. Attach the top and bottom door hinges using
screws removed in step 6 (Figure 9).
11. Place lower V-block into lower cabinet hinge
with notch parallel to cabinet (Figure 10).
Top hinge
and screws
Bottom hinge
and screws
Figure 9. Door Hinges
V-block parallel
to cabinet
TOP VIEW
Figure 10. Installing V-Block
12. Lift door assembly and insert top pin into
bearing. Move door toward cabinet and align
V-blocks (Figure 11).
13. Insert and tighten lower hinge pin to complete
assembly.