Petsafe 400-1255-19 Beverage Dispenser User Manual


 
www.petsafe.net
5
DO NOT RUN DRY - FOR INDOOR USE ONLY
OPERATING INSTRUCTIONS
1)
2)
3)
4)
As with any electrical device, check the electrical cord for any
tears, or damage before use.
Make sure the inline plug is connected. (No silver showing)
Remove the housing cover (lid) by placing your index ngers
into the inset groves on either side of the lid. Lift up. Set the lid
aside.
Lift up the reservoir and check to make sure the intake tube is
properly inserted into the motor. (Fig. 1a &1b)
Insert the charcoal lter. The lter will t into the two triangular
slots in the center of the housing. The lter ts narrow side
down and the black side faces the front of the fountain. The
lter will slide easily into place.
NOTE: Rinse the lter thoroughly
under cool water before placing
into the housing. This will remove
any loose charcoal dust, which
is harmless. A small amount of
charcoal dust may shed for the
life of the lter. This is normal and
not harmful to your pet. (Fig. 1c)
5)
Fig. 1a
Fig. 1b
Fig. 1c
Fountain will come fully assembled and ready for use.