Philips AZ9015 Cooktop User Manual


 
FEATURES
18
Use the AY 3767 cord remote control. The buttons on the remote control have the
same functions as the corresponding buttons on the CD player.
1 If necessary press 9 once or twice until the set is switched off.
2 Firmly connect the remote control to LINE OUT/p and the headphones to the
remote control’s socket.
3 Turn the volume down with VOL F on the remote control and set VOL E on
the CD player to position 8.
You can connect your CD player to digital equipment (e.g. a CD recorder) with a
DIGITAL OPTICAL IN/AUX socket.
1 Use the mains adapter, switch ESP off and turn down the volume of the appliance
that should be connected.
2 Connect an optical cable or signal lead to the OPT OUT socket of your CD player
and to the DIGITAL OPTICAL IN/AUX socket of the other appliance.
To adjust volume and sound, use the controls of the connected appliance.
Notes: – For analogue connections use the LINE OUT/p socket.
– Playback via OPT OUT does not work if the player is supplied by batteries.
Optical out (not on all versions)
Remote control (not on all versions)
English