Filter
Top Products
7 Repeat the descaling procedure (steps 2 to 6)
once. Replace the used pod with another used
podtolteroutthescaleresidue.
Note: Do not rell the water reservoir with the used
descaling mixture.
8 Rinse the water reservoir with tap water. Fill
the water reservoir up to the MAX indication
with tap water and repeat steps 3 and 6.
Note: Do not rell the water reservoir with used hot water.
9 Fill the water reservoir with fresh tap water up
to the MAX indication again and repeat steps
5 and 6 once more.
Note: Always rinse the machine by letting it empty two
full water reservoirs.
10 Remove the used pod and clean the pod
holder after descaling to prevent the sieve in
the centre from getting clogged.
Frost-free storage
After you have ushed the machine for the rst
time (see chapter ‘Before rst use’), it may only be used
and stored in a frost-free place to prevent damage.
Ordering accessories
To purchase accessories for this appliance, please
visit our online shop at www.shop.philips.com/
service. If the online shop is not available in your
country, go to your Philips dealer or a Philips service
centre. If you have any difculties obtaining accessories
for your appliance, please contact the Philips Consumer
Care Centre in your country. You nd its contact details
in the worldwide guarantee leaet.
ENGLISH 25