Philips HD8881 Coffeemaker User Manual


 
23
ENGLISH
23
Adjusting the Co ee Length
The machine allows you to adjust the amount of brewed co ee according
to your taste and/or the size of your cups.
Each time the “
” or “ ” button is pressed, the machine brews a pre-set
amount of co ee. Each button may be individually programmed for a
speci c brew setting.
The following procedure describes the programming of the “
” button.
1
Place a cup under the dispensing spout.
GreenGreen
2
Press and hold the “ ” button until the “MEMO”icon is displayed.
Then release the button. The machine has now entered programming
mode.
The machine starts brewing co ee.
3
When the “STOP”icon is displayed, press the “ ” button as soon as
the desired amount of co ee is reached.
Now the “
” button is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
To program the “
” brew button, the same steps should be followed.
You should always use the “
” button to stop brewing co ee when the
desired amount of co ee is reached even when you are programming the
” brew button.