Philips HR1727 Blender User Manual


 
Blender
Never fill the blender jar with ingredients that are hotter than 80 cC.
To prevent spillage,do not put more than 1.25 litres of liquid in the blender jar,especially
when you are processing at a high speed.Do not put more than 1 litre in the blender jar
when you are processing hot liquids or recipes that create a great deal of foam.
Never forget to place the sealing ring on the blade unit before assembling the blender jar,
otherwise leakage will occur.
Always make sure the lid is properly closed and the measuring cup has been inserted
properly before you switch the appliance on.
Mill
Never use the mill for more than 30 seconds without interruption.Allow the mill to cool
down for at least 1 minute between the processing cycles.
Never forget to place the sealing ring in the blade unit before you assemble the mill jar,
otherwise leakage will occur.
Never use the mill to grind very hard ingredients such as nutmeg,Chinese rock sugar and ice
cubes.
Always process cloves,star anise and aniseed together with other ingredients.If processed
separately,these ingredients may attack the plastic materials of the appliance.
The mill beaker may become discoloured when the mill is used to process ingredients such
as cloves,anise and cinnamon
The mill is not suitable for chopping raw meat. Use the blender instead.
Do not use the mill to process liquid mixtures such as fruit juice.
Filter
Never use the filter to process ingredients hotter than 80cC.
Never overload the filter. Do not put more than 50g of dried soy beans or 150g of fruit in
the filter at the same time.
Always make sure the lid is properly closed and the measuring cup has been inserted
properly before you switch the appliance on.
Cut the fruit into smaller pieces before putting it in the filter.
Soak dried ingredients,such as soy beans,before putting them in the filter.
Before first use
Thoroughly clean the parts which will come in contact with food before you use the appliance for
the first time (see 'Cleaning').
ENGLISH 7
Never place the blade unit onto the motor unit without having the (blender or mill) jar
properly attached.
If the blades get stuck,unplug the appliance before removing the ingredients that are
blocking the blades.
If necessary use a spatula to remove food from the wall of the jar after you have switched off the
appliance.
Always make sure that the blade unit is correctly assembled before you plug the appliance in
and switch it on.
Never use any accessories or parts from other manufacturers that have not been specifically
advised by Philips.Your guarantee will become invalid if such accessories or parts have been
used.