Philips HR1747 Blender User Manual


 
Cleaning
Cleaning of the appliance, its parts and the accessories is easiest immediately after use.
Never clean the accessories or parts of the appliance in the dishwasher.
Do not use abrasives, scourers, alcohol, etc.
Always unplug the appliance before cleaning it.
B
After cleaning the parts and/or accessories, rinse them with clean water and dry them
thoroughly.
Motor unit
Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap
Blender jar
Never clean the glass jar with water hotter than 160cF/80cC.
Quick cleaning:
1 Assemble the blender jar (see 'Using the appliance').
2 Pour warm water and some washing-up liquid into the blender jar.
3 Place the lid on the blender jar and insert the stopper into the opening in the lid.
4 Let the appliance run for a few moments by pressing the Quick Clean button (M), then
release this button. Repeat this process a few times. (fig. 9)
5 Press the off button (0).
6 Wait until the blades have stopped moving.
7 Unplug the appliance.
8 Remove the blender jar and rinse it with clean water.
9 Thorough cleaning: remove the blade unit and clean all parts separately.
Filter
1 Remove the filter from the blender jar.
2 Hold the filter over a waste bin and gently shake out its contents.
3 Rinse the filter under the tap.
4 It may be necessary to soak the filter in warm water for a few minutes before rinsing it.
5 If necessary, the mesh of the filter may be cleaned with a very soft brush.
ENGLISH10