Philips HR2067 Blender User Manual


 
2 HR2067/HR2066/HR2064 only:close the lid.
3 HR2074 only:put the lid on the blender jar to fix the filter in its proper position.Fasten the
lid on the jar by pressing it down and turning it (fig.9).
Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour
out liquids.
Using the filter
1 Put the ingredients in the filter through the opening in the lid.
Cut fruits into smaller pieces and soak dried pulses,such as soy beans,before processing them in the filter.
2 Add water or another liquid.
3 Put the measuring cup in the lid,set the control knob to the highest speed and let the
appliance run for max.40 seconds.
4 Switch the appliance off.Pour out the drink through the spout of the blender jar (fig. 10).
Make sure the lid is closed and the measuring cup is in the lid.This prevents pulp and skins from
ending up in your drink.
5 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening the lid,and let it run for a few more seconds.
6 Pour out the rest of the drink.
Tips
Particularly when you are processing large quantities,we advise you not to put all the
ingredients in the filter at the same time.Start processing a small quantity, let the appliance
run for a moment,switch it off and then add another small quantity.
To get the best result when making fruit juices and cocktails, add approx.300ml water
(or another liquid if you are making e.g. cocktails) to 150g fruit.
To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in
the lid onto the rotating blades.
Mill (HR2067/HR2061 only)
The mill can be used for grinding and chopping ingredients such as peppercorns, sesame seeds,rice,
wheat, coconut flesh, nuts (shelled), coffee beans, soy beans, dried peas,cheese, breadcrumbs, etc.
Always process cloves,star anise and aniseed together with other ingredients.If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.
Preparing the mill for use
1 Put the ingredients in the mill beaker (fig.11).
B
See the mill table at the end of these instructions for use for the recommended quantities and
processing times.
2 Screw the mill blade unit clockwise onto the mill beaker (fig.12).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (fig.13).
Using the mill
1 We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
ENGLISH 9