Filter
Top Products
Checking that the units have established a
connection
• Check that the DECT SYSTEM LINK light (21) on the Parent Unit lights
continuously (green) to confirm that the connection between both units
is reliable.
> When losing the link it will take about 8 seconds before the system link
led starts blinking. After another 30 seconds, the led blinks read and the
alarm sound is heard on the parent unit.When re-establishing the link it
takes maximally 30 seconds to confirm the link again.
Switching the night lights on and off
•Press the ɨ button (2) on the Baby Unit to switch on the night lights.
•Press the
ɨ button again to switch off the night lights.
> The nightlights dim and gradually switches off.
Notes:
– Switch off the night lights when operating the Baby Unit on batteries to
conserve power.
– The nightlights can also be switched on and off via the Parent Unit menu.
For this see ‘Parent Unit menu operation’ and ‘Menu options’.
Paging the Parent Unit
If the Parent Unit is misplaced and the volume is switched off, you can use
the Page button on the Baby Unit to locate the Parent Unit.
• Press the page button (1) on the Baby Unit.
> The Parent Unit will automatically reset to medium volume level and
paging alert will sound.
• To stop the paging alert, press the Page button again or any button on
the Parent Unit.
ENGLISH 11
SC486_book.qxd 23-09-2004 18:22 Pagina 11