Philips WP3811 Water Dispenser User Manual


 
Do not store puried water to avoid contamination. Air contact
contaminates puried water quickly. If you want to store puried
water, use a clean container and keep it in the refrigerator. Do not
keep it in the refrigerator longer than 1 day to avoid contamination.
Features
Philips’ multi-ltration system consists of a primary lter, a secondary
lter, a high-tech hollow-bre membrane lter and a granular
activated carbon lter.
The hollow bre membrane contains 520 billion micropores
(WP3811) or 400 billion micropores (WP3810) that are small
enough to remove particles down to 0.1µm. It eliminates 99.99%* of
bacteria, rust and other particles larger than the micropore size
from your tap water without removing calcium, magnesium and other
minerals that are vital to your body. (* tested according to Japanese
Water Purier Association (JWPA) standard).
The granular activated carbon removes the unpleasant chlorine smell
and taste from your tap water.
Apart from the recommended cartridge lifetime, Philips’ unique
cartridge replacement indicator helps you determine when to replace
the lter cartridge.
Preparing for use
Before installation
Before you install the water purier, make sure all tap-mounting
adapters you require are present.
The tap must have a diameter of 13mm-25mm.
Determine what type of tap you have and select the appropriate
adapter.
The adapters supplied make the water purier suitable for almost
any kitchen tap. However, the water purier may not t some
uncommon types of taps.
The tap water pressure has to be between 0.7kgf/cm² (7 metres of
water column) and 3.5kgf/cm² (35 metres of water column). If you
use the water purier at a water pressure outside this range, either
-
-
-
-
-
-
-
-
-
-
ENGLISH8