Filter
Top Products
WP3892/01
Pure Water Dispenser
Specifications Product highlights
Technical Specifications
• Voltage: 230 V
• Frequency: 50 Hz
• Power Rating: 25 W
• PLS UV Lamp: 9 W
• Output Water Flow Rate: Max. 1.2 l/min
• Max. Input Water Temperature: 45 °C
• Max. Input Water Pressure: 2.0 bar
• Min. Input Water Pressure: 0.5 bar
• Min. Input Water Temperature: 5 °C
Dimensions and weight
• Product weight: 3.8 kg
• Product dimensions: 286 x 156 x 422 mm
• F-box weight: 5.5 kg
• F-box dimensions: 338 x 207 x 460 mm
Logistic data
• CTV: 882389201
• Country of origin: India
• 12NC code: 882389201280
• EAN F-box: 8710103291794
• EAN A-box: 8710103291800
•
Issue date 2007-12-17
Version: 7.1
© 2007 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Power UV+ technology
Advanced state-of-the-art UV (PLS) technology destroys
known waterborne viruses, bacteria, parasites and
amoebae while the activated carbon and sediment filter
removes turbidity, chlorine, volatile organic chemicals
(VOC’s), cysts, larger micro-organisms and improves
taste.
Tilt & Twist Filter change
Replacing the filter is something you can easily do yourself
thanks to the simple Tilt & Twist mechanism.
PowerSave
This appliance has low electricity consumption and is
rated at 25 watts. To make it even more energy efficient,
the UV lamp switches off when the appliance has not
been used for 10 minutes.
IntelliFill
When the purifier senses water pressure, IntelliFill will
start purifying and dispensing water upto the amount you
have set. This way, available water is purified, even when
you are away or asleep, and you will always be sure of
having enough pure water when you need it.
PureProtect Alert
After 2700 litres of water consumption, PureProtect Alert
sends out a signal. There will still be enough capacity for
another 300 litres after the signal.
PureProtect Lock
The PureProtect Lock guarantees high quality of your
dispensed water. If the fi lter is not replaced on time (i.e.,
within 300 litres of water consumption after the
PureProtect Alert signal), the Pure Water Dispenser will
be locked so that no more water can be dispensed. The
Pure Water Dispenser also locks itself if no fi lter is
mounted, if it is not mounted properly, or if the UV lamp
fails.
Gold Seal by Water Quality Association
(WQA), USA
WQA (Water Quality Association, USA) only awards the
Gold Seal to those systems, components or additives that
have met or exceeded industry standards for
contaminant reduction, structural integrity, and material
safety. This product is certified by WQA to conform to
NSF/ANSI 42 for the removal of chlorine and
particulates(removes all classes of particulates from Class
I till Class VI - particle size 0.5µm till 80 µm), NSF/ANSI
53 for the removal of turbidity, volatile organic
chemicals(VOC’s)and cysts and NSF/ANSI 55 Class A for
microbiological dis-infection.
Tested by KIWA Water Research, The
Netherlands
Tested by Kiwa Water Research: Microbiological
performance tested by Kiwa Water Research(The
Netherlands)according to the NSF standard 55,Class A
protocol(2004).