Filter
Top Products
En
6
Names of parts of the Serato DJ software
Computer screen when the Serato DJ software and this unit are connected
This screen is an example of the screen displayed after the driver software is installed, with the computer and this unit connected and tracks loaded in the respective decks.
11 2
3
1 Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
2 Waveform display
The loaded track’s waveform is displayed here.
3 Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
! This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see the Serato DJ soft-
ware manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site below.
See [Software Info] under [DJM-900SRT].
http://pioneerdj.com/support/
Computer screen when the Serato DJ software and this unit are connected (setup screen)
This is the Setup screen displayed when the computer and this unit are connected after installing the driver software.
1 12
1 CALIBRATION DECK
The Serato DJ software calculates analog signals from the control disc and processes the signals of digital audio files.
Different signal levels and device statuses can be calculated for each usage environment to make the optimum settings for reading out the control signals.
2 Utility settings
Utility settings such as settings affecting the entire system and detailed operation settings can be made here.