Filter
Top Products
g. The main burner (4) will light and be controlled by the thermostat. The pilot burner will
remain lit regardless of the switch position.
1.5.2.1.1 Pilot Flame Adiustment - The pilot flame should be adjusted to prod~ the ~r
millivolt output from the pilot sensing devi~. Millivolt output for the thermopile should be between
300 and 500 millivolts. Figure 1-2 shows the pilot assembly with examples of the incorrect and
correct pilot size. Example A illustrates a pilot flame size that is too small to produ~ sufficient
millivolt output. Example B is the correct size for proper millivolt output
TME~ll£ \
PILOT IUDU \ \
M
B
A
Figure 1-2 Pilot Assembly,
1-9