Filter
Top Products
5
L15-020 Rev 10 Effective 07.01.08
Solstice Gas Fryers
For Use In A System Or Stand Alone
GAS
All Solstice Gas Systems standard with rear “T” gas manifold and 9” legs. For prepackaged systems see page 6.
Model Oil Sufx S Sufx SS Approx. Approx. Back-up Basket
Number Capacity BTU’s Stainless Steel Stainless Steel Ship Wt. Cubic T-Stat Lifts
(Lbs.) Tank, Front Tank, Front (Lbs) Feet (See Note 1)
and Sides Sides and Back
Millivolt Thermostat
SG14 40-50 110,000 $5,384 $5,794 200 17
SG14R 40-50 122,000 $6,250 $6,660 208 17
SG14T 20-25ea 50,000ea $7,538 $7,948 230 17
SG18 70-90 140,000 $6,832 $7,242 226 23
Solid State Thermostat - standard with melt cycle, boil-out
capability, matchless ignition, and drain valve interlock switch.
SG14-SSTC 40-50 110,000 $6,092 $6,502 200 17
SG14R-SSTC 40-50 122,000 $6,958 $7,368 208 17
SG14T-SSTC 20-25ea 50,000ea $8,600 $9,010 230 17
SG18-SSTC 70-90 140,000 $7,540 $7,950 226 23
Digital Control - standard with two count down timers, melt cycle,
boil-out capability, matchless ignition and drain valve interlock switch.
SG14-D 40-50 110,000 $6,286 $6,696 200 17 $434 $2,402
SG14R-D 40-50 122,000 $7,152 $7,562 208 17 $434 $2,402
SG14T-D 20-25ea 50,000ea $8,946 $9,356 230 17 $652 $2,402
SG18-D 70-90 140,000 $7,734 $ 8,144 226 23 $434 $2,402
Computerized Control - standard with twelve count down timers
with elastic “ex time” for more product consistency. Melt cycle, boil-out
capability, matchless ignition, and drain valve interlock switch.
SG14-C 40-50 110,000 $7,464 $7,874 200 17 $ 434 $2,402
SG14R-C 40-50 122,000 $8,330 $8,740 208 17 $434 $2,402
SG14T-C 20-25ea 50,000ea $10,738 $11,148 230 17 $652 $2,402
SG18-C 70-90 140,000 $8,912 $9,322 226 23 $434 $2,402
Solstice Bread And Batter - BNB Dump Station
Standard with 4-5/8” recessed pan and screen. Scooped pan liner available at no additional cost in lieu of screen.
Additional BNB accessories on page 15.
BNB-SG14 $1,762 $2,172 150 17
BNB-SG18 $1,762 $2,172 150 23
Note 1: To meet AGA/CGA/CSA requirements, all fryers with basket lifts must be ordered with casters and installed with a FLEXIBLE GAS CONNECTOR
with restraining device. Add 100 lbs to fryer weight. Basket lifts add 3-7/8” to overall depth of fryer.
SOLSTICE GAS FRYERS
Model SG14 with Optional
Computer and Casters
Model SG14R with
Optional Casters