Pitco Frialator SSH75 Fryer User Manual


 
Model SSH55, SSH55T and SSH75 Solstice Supreme Gas Fryer
Pitco Frialator, Inc P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304
603-225-6684 FAX: 603-225-8497 www.pitco.com
L10-266 Rev 1 02/07 Printed in the USA
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
Model SSH55, SSH55T and SSH75 Solstice Supreme Gas Fryer
12 13/16
[32.5]
NOM.
A
C
B
3/4 INCH GAS CONNECTION
(CE 3/4 INCH BSP ADAPTOR
ADDS 1 1/2 [3.8] TO
CONNECTION)
6 FOOT (183 CM) POWER
CORD (NEMA 5-15 PLUG
115VAC UNITS ONLY)
P
G
34 15/32 [87.5]
11/16
[1.7]
4 13/32 [11.2]21 7/8 [55.6]
9 [22.9]
NOM.
INTEGRAL FLUE DEFLECTOR
G
P
38 11/32 [97.4]
P
G
54 13/32
[138.2]
NOM.
46 1/8
[117.1]
NOM.
OPTIONAL BASKET LIFT
THERMOSTAT
OPTIONAL
SOLID STATE
COMPUTER
IN [CM]
A
SSH75
B
C
15 5/8 [39.7]
SSH55/55T
52 11/32 [132.9]
6 1/4 [15.9]
19 5/8 [49.8]
48 11/32 [122.8]
4 1/4 [10.8]
34 [86.4]
NOM.
10 1/2
[26.7]
NOM.
1 13/32 [3.6]
276 Lbs (125 kg)
230 Lbs (104 kg)
Cook Depth Oil Capacity
3-1/4 - 5 in (8.3 -12.7cm)
208 Lbs (95 kg) 258 Lbs (117 kg) 58 x 22 x 44 in (147.3 x 55.8 x 111.7 cm)
Shipping Crate Size H x W x L
280 Lbs (127 kg)
Gas Input Rate / Hr
Gas Type
3-1/4 - 5 in
(
8.3 -12.7cm
)
20 - 25 Lbs (9 -11 kg) 40,000 BTUs (18 kW) (42 MJ)
SSH75
18 x 18 in (45.7 x 45.7 cm) 3-1/4 - 5 in (8.3 -12.7cm)
75 Lbs (34 kg)
80,000 BTUs (23 kW) (84 MJ)
Store Supply Pressure *
Natural
Propane
Fryer
Amps
10" w.c. (25mbars/2.4 kPa)
4" w.c. (10 mbars / 1 kPa)
Frying Area
208 / 220-240V 115V
ELECTRIC SYSTEM REQUIREMENTS (50/60 hz)
40 - 50 Lbs (18 - 23 kg)
# of Cord
105,000 BTUs (31 kW) (110 MJ)
GAS SYSTEM REQUIREMENTS
Burner Manifold Pressure
SSH55
58 x 22 x 44 in (147.3 x 55.8 x 111.7 cm)
32.5 ft
3
. (0.9m
3
)
Shipping Weight w B/L
Model
Model Shipping Weight
SSH55
14 x 14 in (35.6 x35.6cm)
SSH55T
per side
7 x 14 in
(
35.6 x35.6cm
)
Shipping Cube
32.5 ft
3
. (0.9m
3
)
58 x 22 x 44 in (147.3 x 55.8 x 111.7 cm)
32.5 ft
3
. (0.9m
3
)
SHORT FORM SPECIFICATION
Provide Pitco Model (SSH55,55T,75) tube fired high efficiency gas floor fryer with EnergyStar TM**rating. Fryer shall be xx-xx lbs oil capacity, xxx Kbtu/hr,
xx” by xx” fry area, 304 SS peened tank, stainless front, door, sides. Blower Free atmospheric burner system with up to 70% thermal efficiency, self cleaning
burners, down draft protection, matchless ignition, drain valve interlock, behind the door solid state t-stat with melt and boil mode, separate gas shut off, 3/4" npt
rear gas connect, recessed cabinet back, 1-1/4" Full port drain, 3/16" bottom hinge, 9” adjustable legs, manual reset high limit. If supplied with casters: Casters
with 1" min. adjustment and front toe locks. Provide options and accessories as follows:
SSH75 226 Lbs (103 kg)
Rear min.
Do not block / restrict flue gases from flowing into hood
or install vent hood drains over the flue.
6" (15.2cm) 6" (15.2cm)
7 - 10" w.c.(17.4 mbars/ 1.7 kPa)
Sides min.
INDIVIDUAL FRYER SPECIFICATIONS
FRYER SHIPPING INFORMATION (Approximate)
Combustible material Non-Combustible material
INSTALLATION INFORMATION
11 - 13" w.c.(27.4 mbars/ 2.7 kPa)
0.4
SSH55T
10.7
0"
30"
(76.2 cm)
6"
(15.25 cm)
Sides min. Rear min.
0"
* Check plumbin
g
/
g
as codes for proper
g
as suppl
y
line sizin
g
to sustain burner pressure when all
g
as appliances are full on.
CLEARANCES (Do Not Curb Mount)
Fryer Flue AreaFront min. Floor min.