Filter
Top Products
5
Parts and Features
1. Motor Housing
2. Ice Chamber with
Shaving Blade
3. Base
4. 2 Freezer Containers
4
Before First Use: Wash Ice
Chamber and Freezer Containers
in hot, soapy water. Rinse and dry.
6. Push top of Motor Housing to start shaving process.
Release the top to stop shaving. Some ice pieces will
remain in the Ice Chamber.
7. When finished, unplug ice shaver and clean according to
directions in “Cleaning Your Ice Shaver.”
1. Unplug Motor Housing from outlet.
2. To clean Motor Housing, turn upside
down. To remove, grasp the nut and
turn counter-clockwise as shown.
(Use your fingers or a screwdriver.)
3. Wash metal disc and nut in hot, soapy
water. Rinse and dry. Wipe the bottom
of the Motor Housing with damp, soapy
cloth, then wipe dry with a clean cloth.
4. Reattach the metal disc by placing it back onto the motor
housing and screwing on nut. Do not immerse Motor
Housing in water or other liquid.
5. Wash Base, Ice Chamber, and Freezer Containers in hot,
soapy water. Rinse and dry.
Cleaning Your Ice Shaver
wWARNING
To reduce risk of personal injury and/or damage to your
ice shaver:
• Never wash ice chamber with shaving blade, or any part of
this appliance, or other removable parts in a dishwasher.
• Always inspect ice chamber with shaving blade before
each use.
• Do not use a cracked, bent or damaged ice chamber.
How to Use Your Ice Shaver
1. Have your preferred ice rounds or ice cubes available.
2. Place Base on countertop. Place bowl, cup, or other
container onto Base platform to hold shaved ice.
3. Fit Ice Chamber into Base by lining up flat sides.
4. Place ice into Ice Chamber. Do not overfill.
5. Place Motor Housing on top of Ice Chamber. Plug into outlet.