User manUal | 17
17 |
PROLINE
ranGe HooDs
replacing the light bulb
♦ Make sure the range hood is unplugged or turn OFF breaker
♦ Place a flat-head screwdriver between light cover and housing to remove cover
♦ Gently pull defective bulb straight out and discard
♦ Wear a cotton glove or use a cloth to handle the replacement bulb (DO NOT
handle with bare fingers as this may shorten the life of the bulb)
♦ Push gently but securely into light socket. (DO NOT push too hard as bulb legs
may break off)
♦ Replace light cover
♦ Turn ON breaker and range hood to test operation
removing the lter
♦ The filter (A) is located on the bottom of the hood, directly above the cooking
surface.
♦ Hold the filter in place with one hand and pull back on the release lever (B)
with the other.
♦ While pulling back on the release lever, lower the filter out of the hood. On
hoods with more than one filter, remove, clean and replace all of the filters.
Care & Cleaning