10 |
PROLINE
RANGE HOODS
Care & Cleaning
warning
♦ Never put your hand into the area housing the fan while the fan is operating
♦ Turn off power to the hood before cleaning
♦ Make sure your cooktop and hood are cool before cleaning
♦ Use only the types of cleaning solutions mentioned in this manual
♦ Completely dry the filter(s) immediately after cleaning
cleaning exterior surfaces
♦ Regular care will help preserve the appearance of your range hood.
♦ Always wipe stainless steel surfaces with the grain to avoid scratches
♦ Clean periodically with hot soapy water and clean cotton cloth.
♦ For heavier soil, use a liquid degreaser such as 409™ or Fantastic™.
♦ If hood looks splotchy, use a stainless steel cleaner on the surface. Promptly
and gently remove cleaner with a soft towel or wipe.
♦ After cleaning, you may use non-abrasive stainless steel polish (such as 3m™ or
ZEP™) to buff out stainless luster. Always scrub lightly and with a clean cotton
cloth.
DO NOT:
♦ Use corrosive or abrasive detergent (eg, Comet Power Scrub™ or EZ-Off™
oven cleaner).
♦ Use steel wool or scouring pads, which will scratch and damage the stain-
less steel surface.
♦ Leak cleaning solution onto or into the control panel
♦ Allow deposits to accumulate or remain on the hood
♦ Allow salt solutions, disinfectants, bleaches, or cleaning compounds to re-
main in contact with the stainless steel for extended periods.
cleaning the filter
All PROLINE hoods come with either an aluminum mesh or stainless steel baffle filter.
Both types of filters are dishwasher safe for easy cleaning. If handwashing your filter,
follow the instructions in the “Cleaning Exterior Surfaces” section above.