Filter
Top Products
User manUal | 13
step 4
Attach the duct to the top of the
back draft damper. Place the chim-
ney sections over the lower bracket
section and on top of the main unit.
Attach lower bracket to upper brack-
et at desired height using screws
provided.
step 5
Make your electrical connections. The
hood comes with a grounded three
prong plug that can either be direct
wired or plugged into a 20 amp
circuit.
step 6
Slide the inner portion of the chim-
ney up and around the upper
bracket, securing it with the screws
provided.
island hood installation