Proline PLZIGL5 Ventilation Hood User Manual


 
12 |
PROLINE
ranGe HooDs
island hood installation
step 1
step 2
step 3
place brackets vertically inside the 4
corners of the ceiling bracket
extend the brackets to the appropri-
ate length. (the bottom of the hood
should be 28”-36” above the cooktop)
screw all support brackets to the ceil-
ing mounting bracket
Mark ceiling
find and mark the center point directly above your
cooktop
place the ceiling bracket on the ceiling around
the center point. (Make sure it is square with your
cooktop).
trace the outline of the ceiling bracket onto the
ceiling
trace a circle where the ducting will go
mark the 4 corners where you will drill holes
Install ceiling bracket
drill holes into 4 ceiling marks from Step 1.
cut out a hole in the ceiling where the ducting
will go (if you are venting to the outside of your
home)
place chimney bracket against ceiling and screw
into place
drop the ducting and electrical work through the
ceiling (if you are venting to the outside of your
home)
*ceiling bracket must be mounted to a weight-bearing ceiling able to support at least twice the weight of the hood.*
Install support brackets