Filter
Top Products
16
4. Press the memory location number (
1–0
) you want to store.
The keypad sounds two long beeps.
Note:
If you hear three short beeps, you did not store the
number successfully. Begin again from Step 1.
5. Write down the stored name and number on the memory
label provided.
Note:
• If the low battery warning tone sounds while you are on the
phone and the IN USE/LOW BATT indicator flashes,
recharge or install the battery within 2 minutes, or the phone
will not retain the numbers stored in memory (see “Connect-
ing, Charging, and Replacing the Battery Pack” on Page 8).
• If you receive a call while you are storing a number in mem-
ory, press
TALK
to answer the call. After the call, begin again
at Step 1.
• To change a number stored in memory, simply store a new
number in that memory location.
Entering a Pause in a Memory Number
In some telephone systems, you must dial an access code (9, for
example) and wait for a second dial tone before you can dial an
outside number. You can store the access code with the phone
number. However, if you do, you should also store a pause after
the access code to allow the outside line time to connect. After en-
tering the access code, press
REDIAL/PAUSE
to enter a 2-second
pause.