Filter
Top Products
49
● Do not leave the machine exposed to atmosphe-
ric agents or place them in damp rooms such as
bathrooms.
● Do not obstruct the suction or dispersion grilles
and do not cover with cloths, etc.
● Keep the packed machine in a dry place, not
exposed to atmospheric agents and in conditions
in which the temperature does not go below 5°C.
Do not stack more than three items of the same kind.
Do not place heavy items on the packaging.
● In an emergency, such as the breaking out of a fire,
unusual noise, overheating, etc., take immediate
action, disconnecting the power and closing gas
and water taps.
● Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation can cause damage
to people, animals and things for which the
manufacturer cannot be considered respon-
sible
NAME: Coffee machine, CLASSE 6 series
MODEL: E -S - L
VERSIONS: 1 - 2 - 3 - 4 GROUPS (L)
2 - 2 COMPACT - 3 GROUPS (E - S)
The label illustrated on the EC Declaration of Conformity of this instruction manual corresponds to the identifi-
cation label placed on the machine Fig. 2. (Pos. A).
Label identification (Fig.1):
1 Manufacturer
2 Model and version
3 Voltage
4 EC conformity mark (if required)
5 Serial number
6 Boiler data
7 Machine total absorption
8 Protection level
9 Motor power
10 Heating element power
11 Frequency
12 Conformity marks
13 Year of manufacture
Symbols
Warning signal. The instructions which refer to this signal must be followed with great care in order to
avoid accidents or damage to the machine.
This manual is an integral and essential part of the product and must be delivered to the user. The warnings
contained in it must be read carefully, as they supply important indications relating to the safety of installation,
use and maintenance. Keep this manual for future reference.
1. GENERAL SAFETY RULES
● Don’t leave the packing elements (plastic bags,
expanded polystyrene, nails, cardboard, etc.)
within the reach of children, as these elements
are potential sources or danger.
● Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
● Adaptors, multiple sockets and /or extensions must
not be used.
● In doubt, request an accurate control of the plant
by qualified personnel. The electric plant must be
provided with the following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption
capacity
- efficient earth leakage protection circuit
breaker.
● Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, fireplace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.