Filter
Top Products
10
Memory Function Module
If a power cut occurs while the selected washing program
is active, the program is not cancelled. The controls use a
microprocessor device to memorize the information about
the selected washing program. Once the power is returned
to the machine, the dishwasher will resume from the point it
was interrupted.
Cancelling or modifying a washing
program cycle
1. To modify or cancel a washing cycle it is necessary
to reset the previous programming, by holding the
programme button for at least 3 seconds. The buzzer
will emit one short warning signal.
2. If the reset operation was successful, a drain phase
will start. Once the drain phase has ended a new
programme can be selected.