Filter
Top Products
HL004
5
- 3 -
RML3336, RML3342,
RML4548 or RML4560
Custom hood Liner (optional)
Model 418
10” Rd
adjustable elbow
(optional)
Model 415
7” Rd adjustable
elbow (optional)
8” Rd
adjustable elbow
(optional)
Model 412
transition
(3 1/4” x 10” to 7”)
Adapter and damper
3 1/4’’ x 10’’
(supplied with P5
and P8 blowers)
Adapter and damper
3 1/4’’ x 14’’
(supplied with P8 blower)
Model P5
single-blower
(500 cfm)
RMIP33
OR RMIP45
INSERT
RMIP33 AND RMIP45
INSERT SYSTEM
Model 331H (600 cfm)
or 332H (900 cfm)
exterior blower
Model 335 (1200 cfm)
or 336 (1500 cfm)
exterior blower
Flow deviator
(supplied with
P5 and P8 blowers)
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
Model 421
(10” Rd. vert.
in-line damper)
8” Rd
standard
duct
Model 407
(7” Rd x
24’’ section)
Model 413
transition
(3 1/4” x
10” to 8”)
Model 459 transition
(3 1/4” x 14” to 8”)
Model 410
(10” Rd duct - 2ft. sections)
Model 332 KR
exterior blower
rough-in kit.
Use with all exterior
blower models:
331H, 332H, 335, 336
Model P8 dual-blower (900 cfm)
NOTE: The dual blower P8 can be
installed either with 8’’ or 7’’
round ductwork.
For optimal air and quiet sound
performance, use 8’’round ductwork.
Rough-in kit
(supplied with P5
and P8 blowers)
RBFIP Series
Baffle filters
(optional)
RMIPWC
Wall Control
(optional)
10” Rd metal
flexible duct
(optional)
8” Rd metal
flexible duct
(optional)
7” Rd metal
flexible duct
(optional)
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)