RCA RT2770 Cooktop User Manual


  Open as PDF
of 2
 
2. Positioning the Speakers
1. Center: In surround mode, the center speaker carries most of the
dialog as well as music and effects. It should be set between the left
and right speakers.
2. Front Speakers: Front speakers carry primarily music and
sound effects.
3. Rear Speakers: The rear speakers’ overall sound balance should be as
close as possible to the front speakers. Proper placement is vital to
establish an evenly distributed sound field.
4. Subwoofer: A subwoofer is designed to reproduce powerful low bass
effects (explosions, the rumble of spaceships, etc.) which dramatically
heighten the action on the screen.
3. Front Surround sound Effect(FSsE) Setting
(Optional)
Front Surround sound Effect(FSsE) Setting
If placing the rear speakers (surround speakers) at the back is not a
good choice for you, you can use the Front Surround sound Effect(FSsE).
Follow the following instruction for setting the speakers.
Mounting the Speakers
1. Match the front left and rear left speakers together and match the
front right and rear right speakers together. Place the front speaker
upside down.
2. Slide in the hinge to the bottom of the front speaker until the ‘click’
sound is heard.
3. Slide in the rear speaker to the hinge until the ‘click’ sound is heard.
4. Attach the four rubber feet provided to the top of the front speaker.
Adjusting the Angle of the Speakers
To achieve the best Front Surround sound Effect (FSsE), adjust the
mounted front left and the rear left speakers to the left for an angle of
25
o
- 45
o
from the center.
Adjust the mounted front right and rear right speakers to the right in
the same way.
Place the rear speakers and subwoofer a foot or more away from TV.
After adjusting the angle, the speaker should look like this illustration.
4. Connecting to Audio Components
• The jacks on the back of the unit are used to connect to other components. One optical and one coaxial digital input jacks are provided
for connection.
•To connect a SAT receiver or a DVD player with a digital output, use an optical digital cable (not included) or a coaxial digital cable (included) to
carry the audio signal and enjoy Dolby Digital sound quality.
General controls
Front panel controls
1. ON/STANDBY
Turns on/off the unit. When the unit is turned on, the unit will go to
the mode it was in before powered off.
2.
Starts and pauses playback in USB mode.
3.
Stops playback in USB mode.
4. / (PRESET buttons)
Selects preset stations in AM/FM mode. Directly accesses the previous or
next track in USB mode.
5. USB jack
Connects USB devices.
6. LINE IN
Connects components for audio input.
7. / (SURROUND buttons)
Selects digital sound processor.
(STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY
PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE)
8. DVD/DVR, TV, SAT.CAB, AM/FM, VCR, USB and LINE-IN
(SOURCE buttons)
Selects sound source.
9. Headphones jack
10.MASTER VOLUME
Adjusts the volume.
11.SUBWOOFER
Selects among subwoofer output levels. (SOFT SUBWOOFER, BALANCE
SUBWOOFER, STRONG SUBWOOFER, POWERFUL SUBWOOFER)
3
3
1
1
2
4
Courtesy Dolby Laboratories
Left Rear Speaker
(Surround)
Left Front
Speaker
Center
Right Front
Speaker
Right Rear Speaker
(Surround)
Subwoofer
DVD/SAT/CAB
COAXIAL OPTICAL
1
2
3
4
567 8 9
10
11
Digital Input
Connect components capable of outputting Dolby digital (e.g. DVD or SAT) or standard PCM (CD) format digital
signals. Read section on "Input Signal Setting" under "Advanced Sound Control" carefully to adjust the matching
input settings.
1
2
Hinge
Bottom
Top
Front
Speaker
Rear
Speaker
Rear
Speaker
Center
Front
Speaker
Front
Speaker
25
o
- 45
o
25
o
- 45
o
3
4
Front
Speaker
Rear
Speaker
Rubber
Feet
RT2770 QSG EN 6/3/07 5:19 PM Page 4
 previous