Filter
Top Products
16
Setup menu
Setup menu: Clinical Settings (Mask Type)
1 Press to display the Clinical Settings screen.
2 Use the push dial to scroll through the menu and change the Mask Type in the Advanced
Settings screen.
Mask type options: Nasal, Ultra, Pillow, Full Face, Trach, Pediatric.
Note: When Mask Type is set to Trach or Full Face the Non-Vented Mask alarm
automatically turns on.
For a full list of compatible masks for this device, see the Mask/Device Compatibility List
on www.resmed.com on the Products page under Service & Support. If you do not have
internet access, please contact your ResMed representative.
Setup menu: Alarm Settings (Alarm Volume)
1 Press to display the Alarm Settings screen.
2 Use the push dial to scroll through the menu and change the Alarm Volume to low,
medium or high.
Setup menu: Options
1 Press to display the Options screen.
2 Use the push dial to scroll through the menu and change parameters (see descriptions
in the table below).