Filter
Top Products
TOASTING INSTRUCTIONS
1. Make sure both crumb trays are locked in position on the bottom of the Toaster
and the toasting levers are both in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
Place Toaster on a flat, level, heat resistant surface.
3. Plug the power cord into a 120 V AC electrical outlet.
4. Position the browning selector knob(s) to desired setting. The 4 slots offer you
2 independent toasting browning controls. To test toasting times for browning,
it is best to use all toasting slots; position both of the browning selector knobs
between (3) and (4) medium; then adjust each subsequent toasting
to your preference.
5. Remove all protective wrappings from food before placing into the toasting
slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food
that may get lodged in toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). You may toast in any
or all of the 4 slots. Lower the corresponding toasting lever(s) until locked
into place. The automatic centering guides hold food upright for uniform
side-to-side toasting. When the bread is lowered into position,
toasting will begin.
7. NOTE: The toasting lever(s) will not lock into position unless the Toaster
is plugged into a 120 V AC electrical outlet.
NOTE: When toasting a single slice, the bread may be placed
in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening
of the Toaster; always place bread into the slots.
NOTE: DO NOT change either of the browning selector knob selections during
the toasting cycle. First turn the corresponding browning selector knob to STOP;
then turn the browning selector knob to adjust the browning level.
Lower the corresponding toasting lever and toast until the desired toast color
is achieved.
8. When the toast reaches the selected browning level, it will pop up automatically.
9. Use the high-lift lever(s) to make it easier to remove smaller toasted items.
10. Remove bread from toasting slot(s). Use care when removing bread
as the bread and the top of the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast,
because that may damage the heating element or cause injury.
11. To interrupt toasting, turn the corresponding browning selector knob to STOP.
12. Unplug cord from wall outlet when not in use.
STOP TOASTING
1. When either of the toasting levers is lowered, toasting will begin.
2. To stop or interrupt any toasting cycle, turn the corresponding browning selector
knob(s) to STOP. The bread will automatically rise; the Toaster will turn OFF.
3. Unplug cord from wall outlet when not in use.
6