Filter
Top Products
Before You Call For Service
If you are having an operating problem,
check the list to see what the cause
might be before you call for assistance.
OPERATING PROBLEM
Compactor will not run
CHECK THAT
. Compactor is properly connected to
a live circuit with the proper
voltage.
1 Fuse has blown or circuit breaker
has tripped.
. Drawer is completely closed.
. The key-knob is being turned all the
way to START before releasing.
WHAT TO DO
Plug compactor into a properly
grounded outlet. (See Installation
Instructions.)
Replace fuse or reset circuit breaker.
Push drawer closed.
Restart by turning key-knob all the
way to the left.
Drawer will not open
1 Ram is all the way up.
Turn the key-knob to START and
release.
Trash is not compacting
. Drawer is loaded properly.
Reload drawer. If anything gets
between the ram and the drawer, the
ram will return to the “up” position
without compacting.
1 Compactor is l/3 filled.
Continue to put trash in compactor
and run cycle. Drawer must be at least
l/3 full before compactor will compact.
Not enough compaction or force
. Too many items are being put in
Use the compacting cycle frequently.
drawer before compacting.
Compacting works best when only a
few items are loaded.
Bottles do not break
1 Bottles are centered in drawer.
Load bottles on their side in the center
of the drawer. Not all bottles will
break every time, depending on the
bottle and the trash below it.
Page 6